Clearance From Walls And Ceilings - Envirovent HeatSava Installation Manual

09 Installation
Clearance - Walls
The heatSava has been designed to allow easy installation into an existing wall sleeve which is
located near the ceiling. When core drilling into an existing wall, make sure you have enough space
to move around and distance between the wall and any objects nearby i.e cupboards (Fig.5).
Ensure the unit is sited in a suitable position for adequate clearance on all sides for easy access to
the unit for maintenance purposes and to ensure that access to the release clips on the front cover
is not inhibited.
Ceiling
Cover
release
clips
Option 1
Ceiling
Option 3
14
20mm
min
30mm
min
Pullcord positions shown.
Pullcord NOT supplied with wireless version of product.
SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING THIS UNIT CALL
20mm
min
Clearance - Ceilings
First measure the wall depth.
If installing into a new build
application, we recommend
that
installed in the position below
(option 1). If installing into an
existing wall sleeve which is
located near to the ceiling,
the heatSava can be installed
horizontally
(options 2-4).
Option 2
heatSava
LEAVE ADEQUATE CLEARANCE
cupboard
Fig.5 Plan layout
the unit should be
or vertically
30mm
min
Option 4