Kyocera Ecosys P3050dn Operation Manual page 291

Symptom
Printed images are
skewed.
The altitude is 1000 m or
higher and irregular
horizontal white lines
appear in the image.
The altitude is 1000 m or
higher and dots appear in
the image.
Dirt on the top edge or
back of the paper.
Part of the image is
periodically faint or
shows white lines.
The previous image
remains and lightly
printed.
Checkpoints
Is the paper loaded correctly?
―
―
Is the interior of the machine dirty?
―
―
Corrective Actions
Check the position of the paper width
guides.
Select [Menu] > Adjust/Maint. >
Service Setting > Altitude
Adj. > 2001 - 3000m or 3001 -
3500m, and select [OK] > [OK].
Select [Menu] > Adjust/Maint. >
Service Setting > Altitude
Adj. > 2001 - 3000m or 3001 -
3500m, and select [OK] > [OK].
Clean the interior of the machine.
Select the [Menu] > Adjust/
Maint. > Service Setting >
Drum > [OK] > [OK].
Make sure the paper type setting is
correct for the paper being used.
8-5
Troubleshooting
Reference
Page
page 2-38
―
―
page 7-9
―
page 4-39