Kyocera Ecosys P3050dn Operation Manual page 231

Each Job (Permission for settings for each jobs)
It is possible to set the use of Quiet Mode for each job. Set whether or not to permit the setting for each job.
Each Job:
01 * Permit
02 Prohibit
Restart (Restart Printer)
The procedure described below resets the printer's temporary conditions, such as the current page orientation, font, etc.,
set by commands to their default values. Downloaded fonts and macros are deleted from the printer's memory.
Restart.
Are you sure?
Yes
1
In the Quiet Mode menu screen, press  or  to select Each Job.
2
Press [OK]. The Each Job menu appears.
3
Press  or  to select Permit or Prohibit.
4
Press [OK]. The selected mode is set and the Quiet Mode menu
screen reappears.
1
In the Adjust/Maint. menu screen, press  or  to select
Restart..
2
Press [OK]. A confirmation screen appears.
Press [Yes] ([Left Select]). The printer is restarted.
Pressing [No] ([Right Select]) returns to the Adjust/Maint.
menu screen without restarting the printer.
No
4-151
Operation Panel