Kyocera Ecosys P3050dn Operation Manual page 212

Server Type (Server type selection)
Select the type of server for the authentication server.
Server Type:
01 NTLM
* Kerberos
02
03 Ext.
Host Name (Entering of Host Name)
Enter the host name for the authentication server.
Host Name:
Domain:
* Domain 01
01
02 Domain 02
03 ----------------
Port (Port number setting)
Set the Port number for the authentication server.
Note This setting is only displayed when Ext. has been set as the Server Type (Server type selection) on page 4-
132.
Port:
9093
1
In the Netwk Auth. Set menu, press  or  to select Server
Type.
2
Press [OK]. The Server Type screen appears.
The available server types are as follows:
NTLM
Kerberos
Ext.
3
Press  or  to select the desired server type.
4
Press [OK]. The server type is set and the Netwk Auth. Set menu
reappears.
1
In the Netwk Auth. Set menu, press  or  to select Host Name.
2
Press [OK]. The Host Name screen appears.
3
Enter the host name using the numeric keys.
ABC
Text
4
Press [OK]. The Domain screen appears.
Menu
5
Referring to Domain Name (Selecting of Domain Name) on page 4-
133, select the domain name for the authentication server.
6
Press [OK]. The host name is registered and the Netwk Auth. Set
menu reappears.
1
In the Netwk Auth. Set menu, press  or  to select Port.
2
Press [OK]. The Port screen appears.
Note Select Ext. to perform ID Card Authentication.
Note Up to 64 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-2.
To enter the IPv6 address, enclose the address in brackets [ ].
(e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
4-132
Operation Panel