Changing Network Interface Parameters - Kyocera Ecosys P3050dn Operation Manual

Changing Network Interface Parameters

This printer supports TCP/IP (IPv4), TCP/IP (IPv6), IPP, SSL Server and the IPSec protocols and Security Level.
The table below shows the items required for each of the settings.
Configure the printer's network parameters as appropriate for your PC and your network environment.
Menu Submenu
Network Wired Netwk.
Set
Protocol
Settings
TCP/IP TCP/IP
Settings
IPv4 Setting
IPv6 Setting
LAN Interface
Bonjour Off/On
IPSec Off/On
NetBEUI Off/On
SNMPv3 Off/On
FTP(Server) Off/On
SNMP Off/On
SMTP Off/On
POP3 Off/On
RAW Port Off/On
LPD Off/On
IPP Off/On
Port Number
IPP Over SSL Off/On
DHCP
Auto-IP
IP Address
Subnet Mask
Default Gateway
IPv6 Setting
Manual
Settings
RA(Stateless)
DHCPv6
2-2
Preparation before Use
Setting
On/Off
On/Off
On/Off
IP address
IP address
IP address
On/Off
IP Address IP Address
Prefix 0-128
Length
Default IP Address
Gateway
On/Off
On/Off
Auto/10BASE-Half/
10BASE-Full/
100BASE-Half/
100BASE-Full/
1000BASE-T
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
1 - 32767
On/Off