Kyocera Ecosys P3050dn Operation Manual page 252

Quiet Mode (Selecting the Quiet Mode)
Lower print speed for quiet processing. Select this mode when the running noise is uncomfortable. For details, refer to Quiet
Mode (Setting the Quiet Mode) on page 4-150.
Note The processing speed will be slower than normal when in Quiet Mode.
This cannot be used when Prohibit is set for Each Job (Permission for settings for each jobs) on page 4-151.
Function:
01 Quiet Mode
Duplex
02
03 EcoPrint
Quiet Mode:
* Off
01
On
02
Duplex (Setting the duplex printing)
Set duplex printing. For details, refer to Duplex (Setting the duplex printing) on page 4-46.
Function:
01 Quiet Mode
Duplex
02
EcoPrint
03
Duplex:
01 * Off
Bind Long Edge
02
03 Bind Short Edge
1
In the Copies menu or the Paper Source menu, press
[Function] ([Right Select]). The Function menu appears.
2
Press  or  to select Quiet Mode.
3
Press [OK]. The Quiet Mode screen appears.
4
Press  or  to select On or Off.
5
Press [OK]. The Quiet Mode is set and the Function menu
reappears.
1
In the Copies menu or the Paper Source menu, press
[Function] ([Right Select]). The Function menu appears.
2
Press  or  to select Duplex.
3
Press [OK]. The Duplex screen appears showing the list of available
duplex printing modes.
4
Press  or  to select the desired duplex printing mode.
The message display toggles through the following:
Off
Bind Long Edge
Bind Short Edge
Selecting Off disables duplex printing.
5
Press [OK]. The duplex printing mode is set and the Function menu
reappears.
5-16
Document Box