The Experimental Menu - Cisco C20 Administrator's Manual

Cisco TelePresence System Quick Set C20 / C20 Plus and Profiles using C20
Contents Introduction
The Video settings, continued...
Video OSD LoginRequired
Determine if the system should require the user to login before accessing the On Screen Display (OSD).
If enabled, the user must enter his username and his PIN. After the user has logged in he can only
execute to the configurations changes and commands allowed by his Role.
ADMIN
Requires user role:
<On/Off>
Value space:
On: The user must log in to access the On Screen Display (OSD).
Off: No login to the OSD is required.
xConfiguration Video OSD LoginRequired: Off
Example:
Video OSD InputMethod InputLanguage
The codec can be enabled for Cyrillic input characters in the menus on screen. NOTE: Requires that
xConfiguration Video OSD inputMethod Cyrillic is set to On.
ADMIN
Requires user role:
<Latin/Cyrillic>
Value space:
Latin: Latin characters can be entered when using the remote control (default).
Cyrillic: Cyrillic characters can be entered using the remote control. NOTE: Requires a Cisco
TelePresence Remote Control TRC5 with Cyrillic fonts.
xConfiguration Video OSD InputMethod InputLanguage: Latin
Example:
Video OSD InputMethod Cyrillic
Set the Cyrillic mode for the menu input language in the menus on screen.
ADMIN
Requires user role:
<On/Off>
Value space:
On: Cyrillic mode is available as a menu input language in the menus on screen. This will enable the
setting xConfiguration Video OSD InputMethod InputLanguage.
Off: Cyrillic mode is NOT available as a menu input language in the menus on screen.
Example: xConfiguration Video OSD InputMethod Cyrillic: Off
D14637.04 Profile C20 and Quick Set C20 Administrator Guide TC4.0, November 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Web interface Advanced configuration Advanced configuration

The Experimental menu

The Advanced configuration menu has an option called Experimental. The Experimental settings
are beta settings. These settings can be used 'as is', and are not fully documented.
NOTE:
Experimental CapsetFilter
Experimental CustomSoftbuttons State [1..2] Softbutton [1..5] Type
Experimental CustomSoftbuttons State [1..2] Softbutton [1..5] Value
Experimental Conference [1..1] PacketLossResilience ForwardErrorCorrection
53
Password protection
The Experimental settings are likely to change without further notice .
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings are likely to change.
ADMIN
Requires user role:
<S: 0, 100>
Value space:
xConfiguration Experimental CapsetFilter: ""
Example:
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings are likely to change.
ADMIN
Requires user role:
<NotSet/MainSource/PresentationSource/CameraPreset/Actions/
Value space:
SpeedDial>
xConfiguration Experimental CustomSoftbuttons State 1 Softbutton 1
Example:
Type: NotSet
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings are likely to change.
Requires user role: ADMIN
Value space: <S: 0, 255>
xConfiguration Experimental CustomSoftbuttons State 1 Softbutton 1
Example:
Value: ""
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings are likely to change.
Will enable ForwardErrorCorrection (RFC5109) mechanism as part of the PacketLossResilience
mechanism. Default value is On.
On: Forward error correction will be used as part of the PacketLossResilience mechanism.
Off: Forward error correction will NOT be used as part of the PacketLossResilience mechanism.
ADMIN
Requires user role:
<On/Off>
Value space:
Example: xConfiguration Experimental Conference 1 PacketLossResilience
ForwardErrorCorrection: On
Administrator guide
Appendices Contact us
www.cisco.com