The Web Interface - Cisco C20 Administrator's Manual

Cisco TelePresence System Quick Set C20 / C20 Plus and Profiles using C20
Contents Introduction

The web interface

The web interface allows for remote administration of the
system.
Connect to the codec
Open a web browser and enter the IP address of the
codec.
How to find the IP address:
To find the IP address, open the System Information page
using the remote control. Navigate to Home > Settings >
System Information.
Password protection of the web interface
In order to access the web interface you must sign in. The
username and password are the same as defined for the
codec. The default username is admin with no password
set.
Read more about user roles and how to manage users in
the User management section, and about ways to password
protect your codec in the Password protection
D14637.04 Profile C20 and Quick Set C20 Administrator Guide TC4.0, November 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Web interface Web interface
Signing in
chapter.
Advanced configuration Password protection
11
Administrator guide
Appendices
1. Enter the IP address of
the codec.
2. Enter the username
and password and
press Sign In.
Contact us
www.cisco.com