Quick Set C20 Plus—Cable Configuration - Cisco C20 Administrator's Manual

Cisco TelePresence System Quick Set C20 / C20 Plus and Profiles using C20
Contents Introduction
Quick Set C20 Plus—Cable
configuration
The illustration shows you the basic setup when connecting the
monitor, PC, camera, microphone,
PrecisionHD 1080p 12X
loudspeakers (if applicable), LAN and line voltage to the Codec
C20.
In order to be able to use the system for video calls,
CAUTION:
all orange colored sockets must be connected.
The codec must be switched off and disconnected from
!
the line voltage whenever connecting or disconnecting
other equipment.
D14637.04 Profile C20 and Quick Set C20 Administrator Guide TC4.0, November 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Web interface Advanced configuration
67
Password protection Appendices Appendices
HDMI
Administrator guide
Contact us
HDMI
www.cisco.com