Omron NY532-1*00-111*13**0 User Manual page 68

3 Hardware Overview
Status LED Indicator
The Status LED indicator provides information about the operating condition of the IPC Machine Con-
troller.
Color
None
Green
Red
Red
Additional Information
• Refer to Industrial Monitor Utility information for brightness adjustment details.
• For Panel PCs without Machine Controller Software the status of this LED can also be de-
fined by the Industrial Monitor API.
• The Industrial Monitor Utility information and the Monitor API information are available:
• For products NYP£ in the section Support Software.
• For products NY5£ in the NY-series IPC Machine Controller Industrial Panel PC / Industrial
Box PC Setup User's Manual (Cat. No. W568)
• NY-series Software Development Kit User's Manual
3 - 10
Status
Not lit One of the following situations:
•
The 24 VDC power is not supplied.
•
Normal operation
•
Turned OFF by the Industrial Monitor Utility.
Blinking Power is currently supplied and the IPC Machine Controller is in
stand-by mode.
Blinking One of the following situations:
•
Fan Error
•
Battery low
Lit At maximum brightness in following situations:
•
Power supply undervoltage error
•
Power supply overvoltage error
•
Power supply defective
•
Monitor internal hardware error
At controllable brightness in following situations:
•
Thermal shutdown
•
Watchdog Error
Meaning
NY-series Industrial Panel PC Hardware User's Manual (W557)