Os Support; Mechanical Specifications - Advantech PCM-3365 User Manual

– Specification and Resolution
* VGA: 2560 x 1600 at 60Hz
* HDMI 1.4a for HD video playback, 1080P at 60Hz, up to 1920 x 1080
* DVI 1.0 (DVI-D), up to 1920 x 1080
* LVDS: 24-bit dual channel LVDS up to WUXGA 1920x1200 at 60Hz
* Inverter power: 1A @ 5V/12V for inverter

Gigabit Ethernet
– Controller: Intel I210
* 10/100/1000 BASE-T
* IEEE 802.3az Energy Efficient Ethernet (EEE), which defines Low Power Idle (LPI) state
* 9 KB Jumbo frames supported (Full-duplex)
* Flow control supported

Peripheral interface
– 1 Serial-ATA port, up to 3.0Gb/s transfer rate (300 MB/s), supports indepen-
dent DMA operation
– 6 x USB2.0
* Six internal USB2.0
* Power supply: 0.5A @ 5V for USB2.0
– 1 RS-232/422/485 for COM1, 2 RS-232 for COM2/3 (ESD protection: air gap
±15kV, contact ±8kV
– 8-bit Programmable General Purpose Input/ Output from iManager (5V tolerance)
– 1 SMBus / I
– Watchdog timer: Output System Reset, Programmable counter from 1 ~ 255
minutes/ seconds
– mSATA/ Mini PCIe
 1 Full-size Mini PCIe (with SATA, USB and PCIe interface, PCIe interface is sup-
ported by request)
– - On-board Flash*
* 16GB, read/write: 66/14 (MB/s, reference)
* 32GB, read/write: 69/22 (MB/s, reference)
* 64GB, read/write: 114/27 (MB/s, reference)

BIOS
– AMI UEFI 64 Mbit, BIOS for 64 or 32-bit is different, default version is for 64-
bit.
– Default setting is Legacy boot, that can be manually changed to UEFI boot. If
default setting to UEFI is needed, that can be done by T-P/N.
* The specification is supported by request.
1.2.2

OS support

PCM-3365 supports Win10, Win8, Win7, WES8, WES7, WEC7, Linux kernel 3.x,
VxWorks 6.9.3.3, Android Kit Kat 4.4
Win7 only supports Legacy mode and Win8 for UEFI mode.
For further information about OS support of PCM-3365, please check Advantech
website:
http://support.advantech.com.tw/ or contact the technical support center.
1.2.3

Mechanical Specifications


Dimensions: 96 x 90 mm (3.8" x 3.5")

Height: top side 14.4mm (N2930, E3825), 19.4mm (E3845), PCB 1.6mm, bot-
tom side 7.8mm, total 23.8mm (N2930, E3825), 28.8mm (E3845)

Weight: 0.735 kg (1.62 lb) (with heat-sink)
2
C channel
3 PCM-3365 User Manual