Quick Start Guide; Hardware - SABERTEK GSM GENIE User Manual

5. Quick Start Guide

5.1 Hardware

1. Connect the antenna to the GSM port.
2. Insert a SIM card into the SIM card slot. Make sure the SIM PIN is either disabled or set to 0000
3. Connect the power supply to the unit.
4. The unit will sound with a double beep and the green heartbeat LED should start flashing. If not,
make sure the power supply is plugged in and switched on.
5. The unit will now try to connect to the server for the first time. If successful, the heartbeat LED
will start blinking with a double flash. It should not take longer than 5 minutes.
Please Note:
If the red GSM LED does not stop flashing after a short while, make sure the GSM antenna is
connected and the SIM card in inserted correctly. This indicates that there is a problem with
either the SIM card or GSM network.