Gate Control Settings - SABERTEK GSM GENIE User Manual

6.4.7 Gate Control Settings

Enable Temp Access: This will enable/disable a feature called temporary access. If enabled, all
programmed cell numbers can allow any number to control selected events for
a specific time. This feature is useful when the unit is installed on a gate motor
at a complex or estate to allow visitor access. (Refer to section 6.6.2)
Temp Access Validity: The time (hours) before a temporary cell number expires.
Two Gate Setup: If the complex or estate have separate gates for entry & exit this feature must
be enabled.
SMS Msg: The SMS message that must be sent to execute the selected events.
Gate Control Nrs can use Missed Call: If enabled, temporary cell numbers will be able to missed call
Gate Control Cell Numbers
The GSM GENIE can be programmed with up to 500 numbers. Please note: These numbers will be
limited to gate control functionality only. Only admin numbers will be allowed to control the unit by
SMS as described in section 6.6.
the unit. (See section 6.4.2)