Analog Inputs - SABERTEK GSM GENIE User Manual

6.5.2 Analog Inputs

The analog inputs on the GSM GENIE is rated for 0-30V. Analog inputs can be used to connect anything
from a temperature probe to a pressure sensor.
Channel Name: The name for the channel.
Low (V): The voltage level where the channel will trigger the LOW events
High (V): The voltage level where the channel will trigger the HIGH events
Trigger Time: When an input changes state, this is the time in milliseconds that have to elapse
before the input will trigger any event. The trigger time will reset if the input
change state during this time.
Debounce Time: This the time in milliseconds that have to elapse after a state change before the
input will trigger again.
Log Interval: If enabled, the actual value of the analog input together with the time will be
logged. The interval options shown in the picture below. Values can be exported
by clicking on "Show Log" for analyses.