Digital Outputs - SABERTEK GSM GENIE User Manual

6.5.3 Digital Outputs

The digital outputs on the GSM GENIE is rated at 3A / 125VAC, 30VDC. Digital outputs can be used to
switch most types of electrical loads such as gate motors, lights and sirens.
Each digital output have 3 terminal connections associated with them:
COM - Common terminal
N/C - Normally Closed terminal
N/O - Normally Open terminal
When the output is OFF, the COM and N/C terminals will be internally connected to each other.
When the output is ON, the COM and N/O terminals will be internally connected to each other.
Please Note: Each output have a LED indicator which will be ON when the output is ON.
Channel Name: The name for the channel.
Pulse Length: The time in milliseconds that the output will change state when pulsed.
Pulse Count: The amount of pulses that will be generated if the output is triggered.
Default State: The default state of the output.
Schedule takes priority: If enabled and the output state is currently different than the default state
because of the schedule, it will ignore any events generated by inputs.
Remember State: If the GENIE reboots, it will remember the current state of the output and not
follow the default state.