Gate Control Sms Commands; Logs - SABERTEK GSM GENIE User Manual

RESET The unit will reset
CONNECT The unit will immediately connect to the cloud server to fetch new settings
1X Control output 1. Where X can be 0=OFF, 1=ON, 2=Pulse, 3=Toggle
2X Control output 2. Where X can be 0=OFF, 1=ON, 2=Pulse, 3=Toggle
SMS Query Description
INFO The unit will reply with a SMS containing it's nick name, firmware version, signal
quality, 24 hour test time, current date and time, cell operator, IMSI and IMEI
STATUS The unit will reply with a SMS containing it's armed status, digital output status,
digital input status, analog input values and AC mains status
ID The unit will reply with its serial number
BAL The unit will reply with its prepaid airtime balance. Please note: This will not
work correctly with a contract SIM card or when roaming

6.6.2 Gate Control SMS Commands

This SMS messages do not need to be prefixed with the password. Please Note: Admin Numbers can
also use this functionality.
SMS Command Description
TA x Allow temporary access to a cell number. Example: TA 0821234567
The unit will automatically send an SMS to the temporary number with instructions. Example:
"You have temporary access to [NICK NAME]. Please SMS [MSG] or phone this number to open the gate.
Valid for a single entry & exit within 24 hours."
[NICK NAME] = Nick name as programmed (refer to section 6.4.1)
[MSG] = SMS message as programmed (refer to section 6.4.7)

6.7 Logs

This shows the activity of the GSM GENIE. Input / output state changes will also be included in the log.