Inputs & Outputs; Digital Inputs - SABERTEK GSM GENIE User Manual

6.5 Inputs & Outputs

6.5.1 Digital Inputs

The digital inputs on the GSM GENIE is optically isolated to protect the unit against electrical spikes.
Digital inputs can be used to connect anything from a switch to a PIR motion sensor for an alarm system.
Channel Name: The name for the channel.
Trigger Time: When an input changes state, this is the time in milliseconds that have to elapse
before the input will trigger any event. The trigger time will reset if the input
change state during this time.
Debounce Time: This the time in milliseconds that have to elapse after a state change before the
input will trigger again.
Please Note: Each digital input have a LED indicator which will be ON when the input is ON.