Ac Detect; Daily Test Report - SABERTEK GSM GENIE User Manual

When enabled and the system is disarmed, all inputs will be ignored. This is useful when there is for
instance a PIR motion sensor connected to one of the inputs and you only want it to be active at certain
times. When enabled and the system is armed, all inputs will be active. Arming and disarming is done via
a SMS command (refer to section 6.4.3)

6.4.4 AC Detect

This is a dedicated input for AC mains to detect power outages. The trigger time (in minutes) is the time
that needs to elapse before the unit will trigger the OFF/ON events.

6.4.5 Daily Test Report

When enabled, the unit will send a daily SMS report to the "Master Number" (refer to section 6.4.6).
This gives the user confirmation that the unit is in working order and have network coverage. The report
time can be set in 24-hour format and the report will contain information like the firmware version,
current time, GSM signal quality etc.