Selecting Events - SABERTEK GSM GENIE User Manual

Event Type: Currently there are four event types namely OUTPUT, SMS, CALL, DSP.
6.2.1.1 OUTPUT Event
This event will switch, pulse or toggle an output. The desired channel is selected via the dropdown
which will automatically be populated with the available channel outputs. The pulse length & count is
configured in the Digital Output settings of each channel (refer to section 6.5.3).
6.2.1.2 SMS Event
This event will send a SMS message to a specific cell phone number. The number and message can be
entered in the available text boxes.
6.2.1.3 CALL Event
This event will generate a missed call to a specific cell phone number. The number can be entered in the
available text box.
6.2.1.4 DSP Event
This event will display a message on a DSP Xpander board. The desired DSP board can be selected via
the dropdown which will automatically be populated with the available DSP boards. The DSP board have
5 different modes which will be explained in section x.x.x Please note: This event will only be available
if you have a DSP Xpander board connected to your GSM GENIE.

6.2.2 Selecting Events

All configured events will show up in the list when selecting events for input & output channels. Multiple
events can be selected and all events can be re-used on different channels.