6.5.3.1 Schedule
All outputs can be controlled by a weekly schedule which is selectable on an hourly basis. This is very
useful to control a geyser, outside lights or swimming pool pump. To set a schedule for an output, click
on the "Set Schedule" button.
In the above example, the output will be ON from Monday to Friday from 06:00 until 18:00. On Saturday
and Sunday's, the output will be ON from 08:00 until 16:00.
6.6 SMS Messages
6.6.1 Admin SMS Commands
Only admin cell numbers will be allowed to use this functionality - Gate control numbers will not be
allowed.
SMS Format
All SMS messages must be prefixed with the password chosen in section 6.4.1 and type of message.
After the password & type, the SMS instruction must follow. Please note: The instruction part of the
message is not case sensitive.
?
=
Query
!
=
Command
Password Type Instruction
1234
!
CONNECT
SMS Command Description
BEEP The unit will give a short beep on this command
ARM The unit will enter the ARM state (Refer to section 6.4.3)
DISARM The unit will enter the DISARM state (Refer to section 6.4.3)