Breville BOV800XL /A Instruction Book page 54

Smart oven
Hide thumbs Also See for BOV800XL /A:
Table of Contents

Advertisement

Available languages

Available languages

TROUBLESHOOTING
POSSIBLE PROBLEM
The 'preheat' alert sounds
at a lower temperature than
what is displayed on the LCd
screen.
The LCd screen
displays 'E01'
The LCd screen displays
'E02'
The LCd screen displays
'E03'
The LCd screen displays
'E04'
The LCd screen displays
'E05'
54
BOV800XL_IB_H11.indd 54
EASy SOLUTION
The 'preheat' alert sounds at 75% of the target temperature.
This provides the fastest, combined preheating and
cooking time.
This is because when the 'preheating' alert sounds,
signaling the user to open the oven door and insert food,
there is dramatic temperature loss inside the oven. If the
alert sounded at 100% of the target temperature, opening
the door would mean a lot of this waiting time is "wasted".
We have calculated that by sounding the alert at 75% of
the target temperature, followed by the oven door being
opened to place food inside the oven, that we still recover
to the target temperature up to 2 minutes faster. This is
why the temperature on the LCD screen does not match the
target temperature at the 'preheat' alert. In total, it takes the
oven approximately 8-10 minutes from start-up, including
opening the oven door when the 'preheat' alert sounds, to
reach the target temperature. To ensure the fastest heat up
time, the Breville oven uses the maximum allowable power
from the outlet (1500W for baking, 1800W for toasting).
The LCD screen will display 'E01' when there is a non-
resettable issue with the appliance. Should this occur,
immediately remove the power cord from the wall outlet and
call the Breville Customer Service Center (1-866-BREVILLE).
The LCD screen will display 'E02' when there is a non-
resettable issue with the appliance. Should this occur,
immediately remove the power cord from the wall outlet and
call the Breville Customer Service Center (1-866-BREVILLE).
The LCD screen will display 'E03' if the oven temperature
is above the set maximum limit. Remove the plug from the
wall outlet, allow the oven to cool for 15 minutes, then plug
back in.
Call Breville Customer Service (1-866-BREVILLE) if the 'E03'
message continues.
The LCD screen will display 'E04' if the room temperature is
below the set minimum. Unplug the oven and relocate to a
warmer area.
The LCD screen will display 'E05' when there is a non-
resettable issue with the appliance. Should this occur,
immediately remove the power cord from the wall outlet and
call the Breville Customer Service Center (1-866-BREVILLE)
21/03/11 9:57 AM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smart oven

Table of Contents