System - Konftel 300IPx User Manual

SET TINGS
AUTO is the default setting and is recommended in most cases. The figure shown in

brackets is the measured calibration value.
Select different levels and compare the audio quality to achieve your preferred

setting.
NB. You must ask the person you are calling to assess the effect of the adjustments you

make.

SYSTEM

The system menu can be used for manual restarts and resets.
Restarting the phone programme
This restarts the telephone application, which takes less than 30 seconds.
Select > SYSTEM > RESTART APPL. (7,1).

Confirm that you really want to restart by pressing OK again, or cancel the restart by

pressing .
Restarting the phone
This restarts the phone, which takes about two minutes.
Select > SYSTEM > RESTART TEL. (7,2).

Confirm that you really want to restart by pressing OK again, or cancel the restart by

pressing .
Restore to factory settings
This option fully restores the Konftel 300IPx to factory settings. All settings are deleted,
including PIN codes and registered accounts. Alternatively, a PIN code is required for
Admin.
Select > SYSTEM > TOTAL RESET (7,3).

Enter the PIN code for Admin and press OK.

Confirm that you really want to restart by pressing OK again, or cancel the restart by

pressing .
31