Advanced Settings; System - Konftel 300IP User Manual

SETTINGS
Settings for connecting external equipment (Aux)
The Konftel 300IP can be connected to a wireless headset and/or an external PA
system. The menu content will vary depending on the accessories connected.
Select MENU > SETTINGS > BASIC > AUX
The default text HEADSET FUNCTION ACTIVE is displayed.
Time format
The date and time can only be set by Admin. The time is normally retrieved from a time
server. The time format has 12-hour and 24-hour options.
Select MENU > SETTINGS > BASIC > TIME FORMAT
Select your choice and press OK to confirm.
Changing text on the display screen
The text on the display screen can be changed when the Konftel 300IP is on hook.
Select MENU > SETTINGS > BASIC > SCREEN TEXT
Delete existing text using C and enter your new text. Press OK to confirm.
Resetting
This resets all user settings for the user profile shown to factory default settings. The
phonebook, conference guide and all basic settings are reset. Account, network and SIP
settings are not reset.
Select MENU > SETTINGS > BASIC > DEFAULT
Confirm that you really want to reset the settings to default by pressing OK again, or
cancel the resetting procedure by pressing C.

ADVANCED SETTINGS

Only Admin. is able to make these settings. See "Installation and Administration of
Konftel 300IP".
26

SYSTEM

Restarting the phone programme
Explanation of situations in which this might be necessary and what it involves.
Select MENU > SYSTEM > RESTART
Confirm that you really want to restart by pressing OK again, or cancel the restart by
pressing C.
Restarting the phone
Explanation of situations in which this might be necessary and what it involves.
Select MENU > SYSTEM > REBOOT
Confirm that you really want to restart by pressing OK again, or cancel the restart by
pressing C.
Restore to factory settings
This option fully restores the Konftel 300IP to factory settings. All settings are deleted,
including PIN codes and registered accounts. Alternatively, a PIN code is required for
Admin.
Select MENU > SYSTEM > RESET CONFIG.
Enter the PIN code for Admin and press OK.
Confirm that you really want to restart by pressing OK again, or cancel the restart by
pressing C.
SETTINGS
27