ANSWERING AND M AKING CALLS
ANSWERING CALLS
A ring tone will be heard and the blue LEDs start flashing.
Press
to answer.
The LEDs show a steady blue light.
ANSWERING CALLS ON HOLD
If a call is made to the conference phone during another call, you will hear a double tone,
INCOMING CALL will be displayed on the screen and the blue LEDs start flashing.
Press
to answer.
The original call will automatically be put on hold.
Press the
(Conference) button to connect the calls.
Press
to end the new call and
Use the line mode
MAKING CALLS
See "MANAGING PHONE LINES" on page 12 about selecting an account before dialling.
Dial the number.
Press
.
The number is called and the LEDs show a steady blue light. The display shows the duration of the
call.
Or:
Press
.
Dial the number and press OK to confirm.
The number is called and the LEDs show a steady blue light. The display shows the duration of the
call.
REDIALLING
Press an arrow button.
The last number that you dialled appears in the display.
Use the arrow buttons to scroll through the call list.
Press
.
The number selected is called.
You can delete the call list by scrolling to the end of the list and pressing OK when the
question "CLEAR LIST?" appears.
to reconnect the original call.
(see page 13) to switch between the calls.
8