If The "-" Indicator Is Blinking In The Gear Position Window While Riding - Honda VFR1200F Owner's Manual

If the "-" Indicator is Blinking in the Gear Position Window While Riding

(VFR1200FD only)
If the "-" indicator is blinking while riding,
you may have a serious problem with the
Dual Clutch Transmission system.
Park your motorcycle in a safe place and
have your motorcycle inspected by dealer
immediately.
To determine whether it is still possible to
continue riding, perform the following.
1. Turn the ignition switch to OFF.
2. Turn the ignition switch to ON and
attempt to start the engine.
If you cannot start the engine:
Turn the ignition switch to OFF and move
the motorcycle back and forth slightly (to
disengage the gears).
Turn the ignition switch to ON again and
again try to start the engine.
If you still cannot start the engine:
Try starting the engine while applying the
brake lever or pressing the brake pedal.
If you can shift from N to D mode:
When a gear position is shown in the gear
position indicator, you can ride in that gear.
Take your motorcycle to your dealer riding
at a safe speed.
If you can't shift from N to D mode and the "-"
indicator is blinking:
Serious damage has occurred and you
should not attempt to continue. Have your
motorcycle inspected by your dealer
immediately.
93