Removing & Installing Body Components
Seat
Front stay
Rear stays
Removal
❙
1. Insert the ignition key into the seat lock,
and turn and hold the key clockwise to
unlock the seat.
2. Pull the rear of the seat back and up.
Prongs
Seat
Seat
lock
Ignition key
❙
Installation
1. Insert the front and rear prongs into the
front and rear stays on the frame.
2. Push forward and down on the rear of
the seat until it locks in place.
Make sure that the seat is locked securely
in position to pull it up lightly.
The seat locks automatically when closed.
Take care not to lock your key in the
underseat compartment.
59