Honda VFR1200F Owner's Manual page 69

6. Remove the right engine heat guard &
right under fairing.
7. Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
Discard the oil and oil filter at an
a
approved recycling center.
P. 61
Rubber
seal
Filter
Engine Oil Changing Engine Oil & Filter
a
8. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
9. Install a new oil filter and tighten.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m).
10. Replace the sealing washer. Install the
drain bolt and tighten.
Torque: 21 lbf·ft (29 N·m, 3.0 kgf·m).
continued 67