Connecting To Your Home Network Manually - Siemens WT4HY749DN Installation And Operating Instructions Manual

Home Connect
en
You can exit the Home Connect
5.
settings by selecting the Remote
Start } button.
If you were not able to establish
Note:
a connection, check whether your
appliance is within range of the home
network and repeat the manual
connection. Try connecting
automatically again or connect your
appliance manually ~ Page 36.
Connecting to your home
network manually
If you have already automatically
connected your appliance to your home
network, you can skip the manual
connection step and connect it to the
Home Connect app ~ Page 37.
If your router does not have a
WPS function, you will need to connect
the appliance to your home network
manually.
Wi-Fi must be switched on at the
appliance.
Switch the appliance on.
1.
Press and hold the Remote Start }
2.
button for more than three seconds.
Aut. network log-in appears in the
display panel.
Use either of the left-hand arrow
3.
buttons to select Man. network log-
in.
36
Use either of the right-hand arrow
4.
buttons to select Connect.
The appliance will now set up its
own Wi-Fi network with the name
(SSID) HomeConnect, which you
can access from your smartphone or
tablet PC.
Call up the Wi-Fi settings on your
5.
smartphone or tablet PC.
Connect your smartphone or
6.
tablet PC to the HomeConnect Wi-
Fi network and enter the Wi-Fi
password (key) "HomeConnect".
The connection process may
Note:
take up to 60 seconds.
Once you have connected
7.
successfully, open the
Home Connect app on your
smartphone or tablet PC.
In the Home Connect app, enter the
8.
name (SSID) and password (key) for
your home network and then select
Transfer to appliance.
If the appliance has successfully
connected to the home network,
Connected è appears in the display
panel.