Agilent Technologies 8590L Service Manual page 583

Softkey Descriptions
Softkey Descriptions
DISPLAY CAL DATA Display Calibration Data
D Displays the current correction-factor data generated
ESCRIPTION
by the
routines. Refer to
an example of typical calibration data displayed when
using
display.
Note that the calibration data provided below is for an
8593E. The calibration data for your analyzer may be
slightly different.
Figure 13-6 Typical Calibration Data: Page 1
Figure 13-7 Typical Calibration Data: Page 2
584
and
CAL FREQ CAL AMPTD
Figure 13-6
Press
DISPLAY CAL DATA.
self-calibration
through Figure 13-8
to exit the data
PRESET
Chapter 13
for