Daikin BRC1E62 Installation Manual page 9

CAUTION
● Perform the wiring apart from a power line not to receive electrical noise (external noise).
● Seal the wiring outlet hole securely with putty (field supply) to prevent entry of insects or
the like.
3-6 Fixing procedure of lower case.
In case of wiring a remote controller through top center outlet or back outlet, perform wiring
through the outlet hole in the lower case before it is wall install.
3-6-1 In the case of installation on the wall
Secure by using attached wood screws (2 pcs.).
3-6-2 In the case of installation on the switch box
Secure by using attached small screws (2 pcs.).
Switch box
(field supply)
(Use optional accessory
KJB211A)
Wood screws
(M3.5×16)
Small screws (M4×16)
Switch box for 2 units
(with no cover)
46
(Installation pitch)
8