Prohibit Buttons - Daikin BRC1E62 Installation Manual

13. Prohibit buttons

● Restriction of the number of operable
buttons.
Press Menu/Enter button in the Basic
13-1
screen.
Main menu is displayed.
Normally, "Lock function" is not shown
in Main menu.
Press Menu/Enter button for 4 seconds
to display the "Lock function".
Select
13-2
Lock function
menu, press Menu/Enter button.
Select
13-3
Prohibit Buttons
press Menu/Enter button.
Select "Up/Down/L/R", "ON/OFF",
13-4
"Mode", Fan Speed"
by using "
set by using "
Press Menu/Enter button.
13-5
Setting confirmation screen is displayed.
Select and press Menu/Enter
13-6
Yes
button.
Setting details are confirmed and Basic
screen returns.
If you want to restrict the number of operable
buttons on the remote controller to be defined
as "sub", start with only connecting this
controller to the unit. Make sure that this
controller is set to "main" (factory set) first,
change the restrictions to the setting you
prefer and only then set the remote controller
to "sub".
To lock menu button in Basic screen,
13-7
proceed as follows:
1. Keep the "
2. Press the 3 other indicated keys
simultaneously while keeping the
" " button pressed.
To unlock menu button in Basic screen,
follow the same procedure.
NOTE: When pressing a prohibit buttons,
the " " will be displayed.
in the Main
in the menu,
" (Left/Right) button and
" (Down/Up) button.
" button pressed.
<Basic screen>
<Main menu screen>
13-1
Main Menu
Air Flow Direction
Quick Start
Ventilation
Energy Saving Options
Schedule
Filter Auto Clean
Return Setting
13-2
Main Menu
Lock function
Air Flow Direction
Quick Start
Ventilation
Energy Saving Options
Schedule
Return Setting
13-3
Lock function
Prohibit Buttons
Function prohibition
Return Setting
13-4
Prohibit Buttons
13-5
Up/Dwn/L/R:
On/Off: UNLOCK
Mode: LOCK
Fan Speed: LOCK
Return Setting
13-6
Prohibit Buttons
Save the settings?
Yes No
Return Setting
<Basic screen>
13-7
1/2
Press Menu/Enter button
for 4 seconds.
1/2
Press Menu/Enter button.
Press Menu/Enter button.
UNLOCK
Press Menu/Enter button.
Press Menu/Enter button.
2
2
1
2
2
24