Accessories; Remote Controller Installation Procedure - Daikin BRC1E62 Installation Manual

2. Accessories

The following accessories are included.
Wood screw Small screw
(M3.5×16)
(2 pcs.)

3. Remote controller installation procedure

3-1 Determine where to install the remote controller.
Make sure to follow "
3-2 Make a wiring through hole on the wall if the wires are taken
out from the back side.
Lower case
through hole
3-3 Remove upper case.
Insert a screwdriver in the recess of lower case to remove the upper case (2 points).
Remote controller Printed Circuit
Board is installed on the upper case.
Take care not to damage the Printed
Circuit Board with the screwdriver.
Take care that dust or moisture does
not touch the Printed Circuit Board.
Clamp
(M4×16)
(2 pcs.) (1 pc.)
1. Safety Precautions
Through
hole
Ø8-10
Operation
manual
(1 pc.)
" when determining the location.
External view of the remote controller
Ø8-10
Set the center of the wall hole
to the center of the wiring
through hole on the controller
lower case when making the
hole.
48.5
CAUTION
If the hole size is too large or the location is not
proper, the hole may come out from the controller.
Screwdriver
Insert and twist the screwdriver
lightly for removal.
Installation
Wiring retainer
manual
(1 pc.) (1 pc.)
Upper case
Lower case
4