Cdd Mounting Hardware; Wall And Ceiling Mounting Brackets - Martin Audio CCD5 User Manual

CDD
USER GUIDE

CDD MOUNTING HARDWARE

WALL AND CEILING MOUNTING BRACKETS

All CDD Models up to CDD12 may be wall mounted. and models up to CDD8 ceiling mounted,
using the appropriate optional bracket. Brackets are available for most models, as summarised
on the previous page. (Note that Models CDD10, CDD12 and CDD15 may also be wall or ceiling
mounted using a yoke assembly – see page 11.)
All mounting brackets allow CDD enclosures to be mounted in either vertical ("portrait") or
horizontal ("landscape") orientation. See page 16 for important information regarding driver
rotation for use in horizontal orientation.
The wall mounting brackets include pan and tilt adjustments to permit optimum alignment,
while the ceiling brackets (CDD6 and CDD8) allow vertical tilt angle to be set. Brackets are
supplied with fixing screws to secure the bracket to the cabinet. To help installers complete a
neat fitment, the fixing plate of all the brackets includes a 19 mm dia. cable access hole for the
connection(s).
NOTE: To assist with first fix installation, mechanical drawings and drilling templates for all
ceiling and wall mounting brackets may be found in the Technical drawings section of this
Guide, see page 57.
Model CDD5:
NOTE: Model CDD5 speakers are packed and shipped in pairs, complete with wall mounting
brackets finished in either black or white to match the speakers. (Note that CDD5s in custom
RAL colours will be supplied with black brackets.) No additional mounting hardware is required
if the speakers are to be wall mounted.
Ceiling bracket – Part Nos. CDDCB5B (black), CDDCB5W (white):
Model CDD5 speakers may alternatively be ceiling mounted using these optional brackets, which
mate with one part of the wall mounting brackets supplied with the speakers.
CDD User Guide V1.0
9