Badge Rotation - Martin Audio CCD5 User Manual

CDD
USER GUIDE

BADGE ROTATION

The badge can also be removed and rotated. It has mouldings on the mounting spigot to ensure
that it can only be repositioned in one of four positions (90° apart). It is recommended that you
change the badge position at the same time as the grille is removed to rotate the driver. On the
back of the grille you will see the badge mounting spigot showing just above the plastic fitting
into which it locates:
Push down on the spigot with your thumb...
...and the badge will pop out of the housing:
It can be rotated 90 or 180° to suit the cabinet deployment and pushed back into place. It is
simply held in place through friction so push it firmly in place to ensure that it doesn't fall out.
CDD User Guide V1.0
15