Martin Audio CCD5 User Manual page 40

CDD
USER GUIDE
The M10 inserts in CSX cabinets are recessed, and the shoulder on Martin Audio eye bolts fits
into the recess. If you use an eye bolt with a shoulder wider than the recess you will need to
space the bolt so it tightens down on the thread rather than the outer surface of the cabinet.
Fit an eye bolt into each of the threaded inserts in the cabinet top (there are four, one in each
corner).
Note that CSX Series subwoofer cabinets are not designed to mate mechanically with CDD Series
cabinets, and have no provision for doing so. If flying both CDD Series cabinets and CSX Series
subwoofers, they must be rigged independently of each other.
Use standard rigging techniques to raise the subwoofers to the required height. Always ensure
that the rigging method and components used are suitable for both the weight of the cabinets
and the suspension points at height.
CDD User Guide V1.0
40