Stihl BGA 85 User Manual page 27

Installing
2
3
: Fit the adapter (1) in the left half
of the handle housing.
Engage recess (2) on large peg (3)
and recess (4) on the smaller
peg (5).
1
2
: Fit the contact plate (1) in the
guides (arrows) in the handle
molding and clamp it securely.
The lug (2) on the contact plate
locates behind the housing wall.
2
1
: Lay the wiring harness in the
guides in the handle housing.
26
The cable tie (1) fits in the
recess (2).
4
1
5
: Fit wiring harness in the
guides (1, 2, 3) in the adapter.
Guides 1 and 2: Red and black
wires at the bottom and the wire
with connector on top.
Guide 3: Wire with connector at
bottom, then the red wire and the
black wire on top.
– Reassemble all other parts in the
reverse sequence.
1 2
3
BGA 85