Charging The Powerbank; Led Display - Silvercrest SPB 2.600 B1 Operating Instructions Manual

Returning the packaging into the material cycle con-
serves raw materials and reduces the amount of
waste generated. Dispose of packaging materials
that are no longer needed in accordance with
applicable local regulations.

Charging the Powerbank

Before using the Powerbank, the integrated battery
must be fully charged.
CAUTION
► The Powerbank must never be charged and
used for charging an external device at the
same time.
♦ Connect the USB plug of the charger cable
to a switched-on PC or a USB power supply
(not supplied).
♦ Connect the microUSB plug of the charging cable
to the microUSB port
The current charge level is shown during charging
by means of the charge level LEDs

LED display

One LED is flashing
One LED is on, the second LED
is flashing
SPB 2.600 B1
on the Powerbank.
:
Charge level
< 20%
20–49%
/
GB IE
11