Cycle Chart - GE GSD2100V Owner's Manual

Getting started
Select Cycle
4
On some models, an indicator light above the selected pad will be on to indicate which CYCLE has been selected.
NOTE: Actual cycle times vary based on soil level, water temperature, and options selected.
POTS & PANS/
HEAVY WASH
(on some models)
NORMAL/
NORMAL WASH
SHORT WASH
(on some models)
WATER SAVER/
LIGHT WASH
(on some models)
RINSE ONLY
DRYING/
PLATE WARMER
(on some models)
HOT PREWASH/
HOT START
(on some models)
CHINA CRYSTAL
(on some models)

Cycle Chart

Models
Timer Models
Electronic Models
1 Hot Start Option adds water amount and cycle time shown when selected.
*Normal Wash button should be pushed to run this cycle.
NOTE: Not all models have every cycle listed.
49-55114
For heavily soiled dishes or cookware with dried-on or baked-on soils. Everyday dishes
may be included. This cycle will not remove burned-on foods.
This cycle is meant for daily, regular, or typical use to completely wash a full load of
normally soiled dishes and is designed to conserve both water and energy.
For quickly washing loads of everyday dishes with medium soils that have not dried on,
such as loads consisting mostly of glasses.
For dishes with light soils.
For rinsing partial loads that will be washed later. Do not use detergent.
For warming clean dishes and serving plates. This cycle will take approximately 30
minutes.
Preheats wash water to the correct temperature.
For lightly soiled china and crystal.
Cycle
Hot Start Option 1
Heavy Wash
Pots & Pans
Normal Wash*
Light Wash/Water Saver
Rinse Only
Plate Warmer/Drying
Pots & Pans
Heavy Wash
Normal Wash
China/Crystal
Rinse Only
Water Usage (gallons)
2.5
4.9 - 7.0
6.0 - 7.0
3.5 - 5.0
3.9 - 5.5
2.2
0.0
8.8
7.5
3.5
6.3
1.3
Cycle Time (minimum)
10
120
118
106
114
58
45
121
115
109
87
5
9