Rinse & Hold; Plate Warmer; Cycle Selection Chart - GE GSD1206 Use And Care Manual

RINSE &"HOLO
Quiet
Power
Dial Cycles
(continued)
The RINSE & HOLD cycle is for rinsing
partial loads which will be washed later.
Do not ltse detergetxt.
a. Make sure ENERGY SAVER is selected.
b. Be sure the door is unlatched.
c. Slowly turn the Cycle Indicator Dial to
RINSE & HOLD.
d. Latch the door to start the cycle.
The PLATE WARMER cycle is for warming clean
dishes and serving plates for the serving of hot foods.
The cycle will take approximately32 minutes if selected.
a. Load clean plates and dishes to be warmed.
b. Select HEATED DRY.
c. Be sure the door is unlatched.
d. Slowly turn the Cycle Indicator Dial to
PLATE WARMER.
e. Latch the door to start the cycle.
Cycle Selection Chart
WashCycle
Water Use
Time
Gallons Minutes
Wash Cycles (approx.) (approx.) Cycle Sequence
POTSCRUBBER 10.6
~~
mmmmmmm
NORMAL WASH
9.1
5]*
BEmEBE
WATER SAVER 6,4
51*
mmmm
CHINA CRYSTAL 8,1
5]*
BmBBmB
SHORT WASH
7.4 43*
WWI-IFIW
RINSE & HOLD 3.0 12
Bm
.—
*Unextended times. These cycle times will be increased approximately 21 minutes If "1'bMPBOLSS1 option IS selected
Drying Options:
HEATED DRY. Available on all !vash cycles except RINSE& HOLD. Add 32 minutes to wash cycle time.
ENERGY SAVER. Drying heater is turned off. Dishes dry naturally.
5