Cycle Selection Chart - GE GSD1150 Use And Care Manual

Dial Cycles
(continued)
The RINSE & HOLD cycle is for rinsing
partial loads which will be washed later.
a. Make sure HEATED DRY is off.
b. Be sure the door is unlatched.
c. Slowly turn the Cycle Indicator Dial to
RINSE & HOLD.
d. Press the OPTIONS RESET button. This
turns all Energy Options off.
e. Latch the door to start the cycle.

Cycle Selection Chart

Water Use
Wash Cycles
NORMAL WASH
LIGHT WASH
WATER SAVER
7.4
SHORT WASH
Drying options:"
HEATED DRY otl". Dryi[lg heater is turned off', Dishes dry naturally.
IPRESS HEATED DRYI
"""
Wash Cycle
Time
Minutes
51*
START --------- SHORT WASH
START DEUV %. —
.
.
OFF 9
WARMER
- -
""""" """"e
RINSE & HOmPRE~"OPTIONSRESfll
The PLATE WARMER cycle is for warming clean
dishes and serving plates for the serving of hot foods.
The cycle will take-approximately 32 minutes if selected.
a. Load clean plates and dishes to be warmed.
b. Select HEATED DRY on.
c. Be sure the door is unlatched.
d. Slowly turn the Cycle Indicator Dial to
PLATE WARMER.
e. Latch the door to start the cycle.
Cycle Sequence
-
5