4x1 4k/18g 100m hdbt poh wall plate switcher with 2x hdmi, dp, usb-c, usb, lan, arc, ir, rs-232, ip control, cec manager, transmitter only (20 pages)
Summary of Contents for Key Digital KD-2x1CSK
Page 1
, led by digital video pioneer Mike Tsinberg, develops and manufactures high quality, cutting-edge technology solutions for virtually all applications where high-end video and control are important. Key Digital ® is at the forefront of the video industry for Home Theater...
Step 4: Connect your HDMI displays to the output port of KD-2x1CSK/KD-4x1CSK unit The KD-2x1CSK/KD-4x1CSK unit may be controlled via the push button on the front of the Step 5: BEFORE connecting power supply to power outlet, screw-in the power supply HDMI unit.
I/O port on the Master Controller or the IR Extender/IR Connecting Block of the 3rd party control system. Units may be addressed when used in a multi-unit system. The Key Digital IR Remote is required to change the address of the KD-2x1CSK/KD-4x1CSK unit. Please press the following sequence on the Key Digital IR Remote to change the address.
The Key Digital IR Remote is required to change the EDID of the KD-2x1CSK/KD-4x1CSK Input (Each): HDMI Connector, Type A, 19 Pin Female » unit. Please press the following sequence on the Key Digital IR Remote to change the EDID Output: HDMI Connector, Type A, 19 Pin Female »...
Please be sure to follow these instructions for safe operation of your unit. technical Support 1. Read and follow all instructions. 2. Heed all warnings. For technical questions about using Key Digital products, please contact us at: ® 3. Do not use this device near water.
Need help?
Do you have a question about the KD-2x1CSK and is the answer not in the manual?
Questions and answers