Important Information; Led Indicators; English - Air Live WL-5450AP Quick Setup Manual

Hide thumbs Also See for WL-5450AP:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Important Information

The AP mode's default IP
address is
192.168.100.252
The default Subnet Mask
is 255.255.255.0
The default SSID is airlive
The default Channel is 11
The default DHCP client is
Disabled
The default is set to AP
mode

LED Indicators

WL-5450AP & WL5460AP
LED
Indicator
Color
Power
Green
Status
Red
Link/Act.
Green
WEP/WPA
Orange
MAC Ctrl
Orange
Bridge /
Orange
Repeater
LAN 1
Green
LAN 2
Wireless Access Point
WL-5450AP / WL5460AP
Solid
Turns solid green when power is
applied to this device.
Turns solid red when the device is
booting, after boot successfully, the
light turn off.
Turns solid green when connected
and associated to at least a client
station.
Turns solid orange when wireless
security is enabled.
Turns solid orange when MAC
Control is enabled.
Turn solid orange when Bridge or
Repeater is enabled.
Turns solid green when linked to a
local network.
This Wireless Access Point can
support four modes AP, Client,
Bridge, Repeater (WDS)
If you want to change to
Repeater mode, please go to
Status> WDS Setting to
enable the WDS function
Under Bridge Mode, you can
set WEP Key or WPA in order
to prevent unrelated people to
eavesdrop.
Status
Flashing
N/A.
Receiving/
Sending data
N/A
N/A
N/A
Receiving/
Sending data

English

1
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wl-5460ap

Table of Contents