Assemble the Fence Bracket Assy (A) to the Jointer
Base (B). Use the four Soc Button Hd Screws (C) to
lock the Fence Bracket Assy in Place. SEE FIG. 1
There are 2pcs Hex Nut (A) on fence bracket assy.
Firstly, please fit the 1st Hex Nut (A) into T-grove (B) of
fence as per FIG.2. And then, to slide the fence to fit
the 2nd Hex Nut (A) into T-grove (B) of fence as per
FIG.3.
3
Please note, the Gap on fence should align with
the cutter-head. SEE FIG.4
4. Use the hex wrench to lock the 2pcs M6x10mm Button
HD Screw (A) tightly onto Fence. SEE FIG.5
Fig.5