Page 1
User manual for art. 1303 and 1304 Manuale d’uso per art. 1303 e 1304...
Page 2
INDOOR USE ONLY these CONNECTORS CONNECTORS art. AMPHENOL/XRL MF male/female connectors are for INDOOR use are IP67 (optional) only art. AMPHENOL/XRL MF connettori maschio/femmina questi connettori sono questi connettori (opzionale) solo per uso INTERNO sono IP67 rel.2 - 01/15 - Studio Due...
Page 3
Page 15 - DMX Listing / Lista dei canali DMX Page 17 - Built in programs / Lista dei giochi Page 18 - Physical / Dimensioni Page 20 - CE standards / Certificazioni CE Page 22 - Warranty / Garanzia rel.2 - 01/15 - Studio Due...
Page 4
WARNING SAFETY INFORMATION (service personnel) 0,2 m IP66 This equipment must be earthed. IMPORTANTE 0,2 m IP66 Questo apparecchio necessita di messa a terra. rel.2 - 01/15 - Studio Due...
Page 5
WARNING IMPORTANTE Solo il destinatario (la persona o ditta ricevente l’apparecchio) può reclamare per questo tipo di danni. rel.2 - 01/15 - Studio Due...
Page 6
Control panel with touch technology Intelligent temperature control Intelligent temperature control Smooth dimming function Smooth dimming function IP 66 IP 66 320W switching power supply 320W switching power supply Rated voltage 100-240V~ Rated voltage 100-240V~ rel.2 - 01/15 - Studio Due...
Page 7
9ch set-up 9ch set-up 9ch set-up 9ch Set up = MASTER & & & & Terminal Line ¿[WXUH ¿[WXUH ¿[WXUH ¿[WXUH ¿[WXUH ¿[WXUH ¿[WXUH ¿[WXUH rel.2 - 01/15 - Studio Due...
Page 8
Termination resistor Terminale di linea GROUND/RETURN/OV N.C. SHIELD GROUND/RETURN/OV DATA COMPLEMENT ( -, INVERTED) Termination resistor 120 Ohm Terminale di linea DATA TRUE ( +, NON INVERTED) INNER CONDUCTOR DATA TRUE ( +, NON INVERTED) rel.2 - 01/15 - Studio Due...
Page 10
DMX led UNLOCK sequence DOWN ENTER 1° 2° 3° 4° 1--- / -2-- / --3- / ---4 To enter the menu Per entrare nel menù ESC / UP / DOWN / ENTER rel.2 - 01/15 - Studio Due...
Page 11
> Select the value off > Selezionate il valore desiderato off (brGt) > Select the value 1 > Selezionate il valore desidarato 1 > Select the value off > Selezionate il valore desidarato off rel.2 - 01/15 - Studio Due...
Page 12
> Select the value +400% > Selezionate il valore desiderato +400% (ScnE) > Select the value ON > Selezionate il valore desiderato ON > Select the value 0 > Selezionate il valore desiderato 0 rel.2 - 01/15 - Studio Due...
Page 13
Set the alogen simulation function mode > Select the value oFF MId1 > Selezionate il valore desiderato oFF MId1 > Select the value off >> or on >> > Selezionate il valore desiderato off >> or on >> rel.2 - 01/15 - Studio Due...
Page 14
> Selezionate il valore desidarato on off .. > Select the value on off .. > Selezionate il valore desidarato on off .. > Select the value on off .. > Selezionate il valore desidarato on off .. rel.2 - 01/15 - Studio Due...
Page 15
GREEN BLUE WHITE 2-127 128-255 Strobe Open Dimmer 0=CUT LINEAR fade time FAST SLOW Rainbow 0-15 16-255 Balanced white normal rel.2 - 01/15 - Studio Due...
Page 16
GREEN BLUE WHITE Dimmer GREEN BLUE WHITE rel.2 - 01/15 - Studio Due...
Page 20
StudioDue Doc. 1303 REV 1 - 06/13 light s.r.l. CITYBEAM LED 12 RGBW/FC 06/2013 Dichiarazione di conformità Declaration of conformity La ditta: STUDIO DUE light s.r.l. The firm: Strada Poggino, 100 01100 VITERBO ITALY dichiara sotto la propria responsabilità che il prodotto:...
Page 21
Direttive: and therefore according to essential requirement of Directives: LV 73/23 AND 93/68 EEC EMC 89/336 AND 93/68 EEC Data di apposizione PAOLO SENSI Date of marking General Manager VITERBO, 03/06/13 rel.2 - 01/15 - Studio Due...
Page 22
Warranty CARD Company name: ..........................Mr./Mrs./Miss: ..........................Address: ............................Tel. or E-mail : ..........................Dealer: ..................... rel.2 - 01/15 - Studio Due...
Need help?
Do you have a question about the 1303 and is the answer not in the manual?
Questions and answers