Packing - Sharp DW-71-H Service Manual

DW-71-H
1. Fix the front door of water tank to the main body
(left and right sides) with tape.
Front door
Water tank
2. Engage the power cord with the cord catch
(upper), and fix it with tape.
Power cord catch
Power cord
3.1 Put the top protecting sheet before inserting the
product into a plastic bag.
3.2 Insert the product into a plastic bag, and fix its
opening with tape.
Adhesive tape 18mm x 150mm
4. Fix the bottom flaps with staples.
Fix the bottom flaps with staples.

PACKING

Tape 40mm x 40mm
Tow places at both sides
(fold back the tape).
Tape 25mm x 150mm
(fold back the tape).
Tape 25mm x 150mm
(fold back the tape).
Plastic bag
Case
Fix flaps with 4 staples.
5. Put in the bottom pad, put the product, and put
on the top pad.
Printed matters
Plug protector
Tape 18mm x 60mm(Yellow)
Printed matters)
Put the side of the polyethylene bag to the
left of the product, and put the ten pad on them.
6. Insert the edges of outer top flaps of case into the
slits of inner flaps to close the top.
Inner flap
34
Plug
Top pad
Case
Outer flap
Case