Explanation Of Function - Sharp DW-71-H Service Manual

1. Operation modes
(1) Dehumidifying mode
(2) Drying clothes mode
Operation procedure
1 .Insert the power plug into the socket.
2. Ascertain that the water tank has been installed correctly.
3. Press the power ON/OFF button.
4. Choose the proper operation mode with the operation mode selection button.
(Whenever the operation mode selection button is pressed, the DEHUMIDIFYING mode and the DRYING
CLOTHES mode are alternately selected.)
Dehumidifying mode
The fan sucks
the wet air into
the dehumidifier.
•This process is repeated continuously, resulting in reduction of indoor
humidity.
•When the discharge tank is filled fully with water, the FULL WATER
STOPPER is actuated, the FULL lamp lights, and the machine is stopped.
Dehumidifying capacity diagram
Testing conditions: Relative humidity 60%.
The dehumidifying capacity varies depending on ambient
temperature and relative humidity.
The graph shows the dehumidifying capacity at specified
temperature and humidity.
1. Dehumidifying mode
The fan motor runs slowly and continuously.
2. Drying clothes mode
The fan motor runs continuously with high speed (air flow
rate is increased by 20%).

EXPLANATION OF FUNCTION

The air is cooled by the
cooler, and the water
vapor is condensed.
Dews on the cooler flow
down from the dew pan
into the water tank.
When humidity is 60%
8
7
6
5
4 60Hz
3
2
1
0 5 10 15 20 25 30
Room temperature (˚C)
9
DW-71-H
The dehumidified air is
heated by the condense
and discharged out.