Setting Customer Parameters With The Tormax User Interface - Tormax 1102 Instructions For Use Manual

Automatic swing doors with drive
Table of Contents

Advertisement

Fault Display
E.g. H31 or E42  See section 7 for the meaning of the display.
• Reset by pressing the selector key 2 briefly.
Resetting the System
• Press the selector key 2 for at least 5 seconds.
The software is restarted. On double-leaved systems the software is restarted automatically on both
drives.
4.3

Setting Customer Parameters with the TORMAX User Interface

The company undertaking the installation reserves the right to restrict access to all or some of the
customer parameter settings. If the user interface is in an area accessible to the public it must be
protected against third party access by a "code lock" or a "lock for the user interface".
Access level "U" for customer parameters
Indication of operating mode
P
Enter the three digit code for parameters
Zero appears as first digit of code
P
T1661_11e
• Similarly, select and confirm the second and the third characters of the code.
If "C" appears, access is blocked. Parameters cannot be re-set in this case.
Press keys 1 and 2
simultaneously until
«U» appears
T1661_9e
Enter first code
digit with key 1
Confirm with
key 2
U appears, ready for programming
P
T1661_10e
Instructions for Use TORMAX 1102, 1201 T-1661 e
Confirm with
key 2
15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1102 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

1201

Table of Contents

Save PDF