Tormax iMotion 1301 Instructions For Use Manual
For automatic swing doors with drive
Hide thumbs
Also See for iMotion 1301:
- Manual (24 pages) ,
- Installation and operating manual (47 pages)
Related Manuals for Tormax iMotion 1301
Summary of Contents for Tormax iMotion 1301
- Page 1 T-1305 e 17.2.12 Translation of the original instructions for use Instructions for Use For Automatic Swing Doors with Drive iMotion 1301 Swing Door Drive ® iMotion 1301.S Swing Door Drive ® iMotion 1401 Swing Door Drive ®...
-
Page 2: Table Of Contents
First edition: 2.12.11, update: 2.12 We reserve the right to make technical changes. Printed on environmentally friendly paper bleached without the use of chlorine. Landert Motoren AG and Landert GmbH are certified to ISO 9001. Instructions for Use iMotion 1301/1301.S /1401 T-1305 e... -
Page 3: General Information
IP 67 (7 days water up to upper edge of floor box) Protective class, control box – – IP 55 Ambient temperature –20 °C to +50 °C Noise emission level < 70 db (A) Instructions for Use iMotion 1301/1301.S /1401 T-1305 e... -
Page 4: Safety
Depending on the system design and equipment, there is a residual risk of crushing, shearing and collision with limited force in the movement area of the door leaf. iMotion 1401 iMotion 1301, 1301.S Instructions for Use iMotion 1301/1301.S /1401 T-1305 e... -
Page 5: Checks
(iMotion 1301 / 1301.S: W = 0) – Broken glass. – Risk of injury when dismantling the door leaves. – Take care when transporting the door leaves. Instructions for Use iMotion 1301/1301.S /1401 T-1305 e... -
Page 6: Product Description
Output message £ Bell / gong £ Light £ Door status Lock u a) £ Electrical door opener b) £ Door handle c) £ Mechanical door lock £ Depending on the system’s equipment Instructions for Use iMotion 1301/1301.S /1401 T-1305 e... -
Page 7: System Function
– Controlled closing using the integral spring. The door can be opened manually by means of the door handle (unlocking). The door then closes again in a controlled manner using the integral spring. – Controlled opening using the integral spring. The door remains open. Instructions for Use iMotion 1301/1301.S /1401 T-1305 e... -
Page 8: Operating Modes
– Unlocking and opening of the door from outside by means of a key switch and the battery unit u. Operating Modes The automatic door system can be operated with the TORMAX user interface u (6 operating modes and status display) or with an operating mode switch u (3 operating modes). -
Page 9: Operation
• Press the selector key 2 for at least 5 seconds. The software is restarted. The control system then conducts a calibration run, checks the travel distance and looks for the closed position. Displayed as H62 and H67. Instructions for Use iMotion 1301/1301.S /1401 T-1305 e... -
Page 10: Operation With An Operating Mode Switch
• Select operating mode OFF (operating mode switch , user interface ) or disconnect the operator from mains (installation switch, mains plug). • Push the door leaf back into the initial position. • Choose operating mode AUTOMATIC 1 or switch on operator. Instructions for Use iMotion 1301/1301.S /1401 T-1305 e... -
Page 11: Procedure In The Event Of A Fault
If this does not reset the fault or if it re-occurs after a short time, you must arrange for the fault to be rec- tified by a skilled person from your TORMAX dealer. In this case note the fault number and inform the dealer. -
Page 12: Maintenance
Only genuine TORMAX spare part should be used. The manufacturer accepts no liability if you fail to observe this requirement. -
Page 13: Appendix
The door stands still. Control system shut down for safety Perform a software-reset. E8.. reasons. The door collides with – Safety device or setting inadequate. Shut down the system. people. (see section 2.6). Instructions for Use iMotion 1301/1301.S /1401 T-1305 e... -
Page 14: Check-List For Functional Checks
There are no ob- jects such as shelves, plant con- T1540_7 tainers and umbrella stands within a radius of 50 cm of the movement area. Instructions for Use iMotion 1301/1301.S /1401 T-1305 e... -
Page 15: Declaration Of Conformity
Serial number: Manufacturer’s address : Base documents: Declaration of incorporation by TORMAX | Landert Motoren AG with the document number: T-1542 Additionally to the standards listed in the declaration of incorporation this door installation is in conformity with the regulations listed... - Page 16 TORMAX Revolving Door Drives Manufacturer: Advice, sales, installation, repairs and service: TORMAX | CH-8180 Bülach-Zürich Phone +41 (0)44 863 51 11 +41 (0)44 861 14 74 Homepage www.tormax.com E-Mail info@tormax.com TORMAX is a Division and a registered trademark of Landert Motoren AG...
Need help?
Do you have a question about the iMotion 1301 and is the answer not in the manual?
Questions and answers