Setting User Information - Panasonic AG-HMC80P Operating Instructions Manual

5
Select ENTER and press the ENTER button
when all items have been set.
With this unit, the time code value is adjusted in
accordance with the format and frame rate. For
this reason, bear in mind that making a change in
the format or frame rate may result in discontinuity
from the last time code value of the previous
recording.
Aspect Recording
Time code adjustment
format ratio
Adjustable in 5-frame
480P/24P
increments

Setting user information

Setting user information allows you to store 8-digit
information in the hexadecimal format.
You can select from USER, DATE, TIME, or TCG
(time code generator) for the UB MODE item in the
setting menu RECORD SETUP screen.
User information is automatically saved in the
memory and retained after you turn off the power.
1
Set the POWER switch to ON.
(Page 30 of Vol.1)
2
Select USER for the UB MODE item in the
setting menu RECORD SETUP screen, and
press the ENTER button.
3
Select the UB PRESET item in the setting
menu RECORD SETUP screen, and then
press the ENTER button.
• Menu operation (Page 40 of Vol.1)
• Operations may also be performed
using buttons on the remote control that
correspond to those on the camera. For
details, see "Description of parts (Remote
control)". (Page 23 of Vol.1)
4
Select YES and press the ENTER button.
5
Using the cursor button, select the item you
want to set with the left or right button, and
set the numerical value with the up or down
button.
You can reset the user information to nothing by
pressing RESET button.
Camera
6
Select ENTER and press the ENTER button
when all items have been set.
75