Main Warning Displays - Panasonic AG-HMC80P Operating Instructions Manual

Screen displays (continued)

Main warning displays

The main warning displays appearing on the viewfinder are listed below. If a warning display is not listed,
check carefully the message displayed.
■
Number
1394 INPUT ERROR
OTHER FORMAT
The format of the signal input to the DV terminal
while in DV IN mode differs from the unit's
settings.
Check the format of the signal input to the DV
terminal.
■
A
ALL DATA WILL BE DELETED.
(INCLUDING CLIP OF AVCHD)
FORMAT THE CARD NOW?
Do you wish to format the SD Memory Card
now? Yes/No
ALL DATA WILL BE DELETED.
(INCLUDING CLIP OF DV)
FORMAT THE CARD NOW?
Do you wish to format the SD Memory Card
now? Yes/No
AVCHD/DV SW CHANGED
TURN POWER OFF
Switch the power off and back on again.
■
C
CANNOT BE USED DUE TO
INCOMPATIBLE DATA.
No use is possible because the standard for the
data is different. If the SD Memory Card was
used on another device, reformat the card with
this unit.
CANNOT DELETE WITH THIS BUTTON
Clip cannot be deleted.
CANNOT DELETE.
Clip cannot be deleted.
CANNOT PLAY WITH THIS BUTTON
No playback is possible.
CANNOT PLAY.
No playback is possible.
96
CANNOT RECORD DV MODE
INTO THIS CARD.
Use an SD/SDHC Memory Card in Speed Class
6 or higher.
CANNOT RECORD PH MODE AND
HA MODE INTO THIS CARD.
This card cannot be recorded to in PH mode or
HA mode. Use an SD/SDHC Memory Card in
Speed Class 4 or higher.
CANNOT SET PRE-REC,
CARD CAPACITY TOO LOW.
PRE-REC cannot be set as the remaining card
capacity is low.
CARD DOOR IS OPEN
Close the card door.
CARD ERROR.
PLEASE REFORMAT.
Formatting has failed. The card needs to be
reformatted.
CARD FULL.
The card is full.
CARD LOCKED.
Unlock the card.